What Works Can You Do Without Listed Building Consent?
1. Works Permitted Without Listed Building Consent
The legal dividing line between "repair" (which generally does not require consent) and "alteration" (which strictly requires consent under Section 7) rests on whether historic material is being renewed with an identical match or changed in form, composition, or appearance.
Splicing new matching seasoned timber into a decayed bottom sash rail or window sill, re-hanging sash cords, and replacing broken panes with traditional putty and matching glass thickness.
Raking out decayed mortar by hand (without mechanical angle grinders) and repointing with matching non-hydraulic or natural hydraulic lime mortar with the same aggregate size, colour, and joint profile.
Stripping slipped Welsh roof slates, replacing rotted timber battens like-for-like, and re-laying the original slates made up with matching reclaimed slates of identical size and colour.
Painting modern plaster walls, repainting previously painted woodwork in non-historic layers, and replacing modern kitchen cabinets or sanitaryware that does not damage historic walls or alter historic drainage paths.
2. Works That Strictly Require Consent (Common Traps)
Removing historic timber windows—even if rotten beyond repair—and replacing them with modern double glazing or uPVC requires full consent. Unauthorised replacement is routinely prosecuted.
Removing any internal partition (including non-load-bearing timber studs) or blocking up an inglenook fireplace changes the historic floor plan and requires consent.
Applying exterior masonry paint to bare historic brick, flint, or natural ashlar limestone fundamentally alters the building's character and traps moisture, causing rapid spalling.
Repointing soft historic brickwork with modern hard Portland cement prevents breathability and forces moisture through the brick faces, resulting in severe frost damage and enforcement action.
3. Quick Decision Matrix: Repair vs Alteration
| Proposed Element | Permitted (No LBC Needed) | Consent Strictly Required |
|---|---|---|
| Windows | Timber splicing, re-cording, reglazing broken panes | Double glazing, new timber profile, uPVC |
| Roofing | Replacing broken slates with matching slate | Changing from slate to tile, installing rooflights |
| Mortar | Matching traditional lime repointing | Cement repointing, changing joint profile |
| Heating / Flues | Reusing existing internal chimney flue liners | External boiler flue on facade, heat pumps |
Unsure If Your Works Need Consent?
Use our interactive checker to test your exact building alterations and evaluate Section 9 legal risks:
Test Your Proposed Works →